Heat transfer screen printing production checklist
A production trial should record film lot, artwork, screen, ink, adhesive, drying, registration, winding, storage and heat-press results. Compare first, middle and last samples from the run and retain wash and stretch test evidence.
Production route
Link each approved sample ID to mesh, stencil, ink lot, drying, tension and press settings. Audit first, middle and last samples.
Equipment for printing the transfer layer; heat pressing and final garment qualification are separate steps.
What to validate before production
- Carrier dimensional stability after each dryer pass
- Layer-to-layer registration across the full web or sheet
- Ink and adhesive compatibility with the intended fabric
- Peel, wash, stretch and abrasion on production samples
Equipment selection
No. Film, ink, adhesive and curing requirements must be checked with real samples before selecting a production configuration.
Frequently asked questions
Can this equipment print every transfer material?
No. Film, ink, adhesive and curing requirements must be checked with real samples before selecting a production configuration.
Does this machine apply the transfer to garments?
These screen printers make the printed transfer layer. Application to the finished product requires a compatible heat press and validated settings.