Silicone heat transfer labels and 3D logos
Screen printing deposits controlled silicone layers on a release carrier. Layer height, intercoat cure, adhesive compatibility and peel behaviour need separate checks. Do not infer final wash durability from print appearance alone.
Production route
Build the silicone mark in layers and record curing between passes. Test the final adhesive on the actual stretch fabric after pressing.
Equipment for printing the transfer layer; heat pressing and final garment qualification are separate steps.
What to validate before production
- Carrier dimensional stability after each dryer pass
- Layer-to-layer registration across the full web or sheet
- Ink and adhesive compatibility with the intended fabric
- Peel, wash, stretch and abrasion on production samples
Equipment selection
No. Film, ink, adhesive and curing requirements must be checked with real samples before selecting a production configuration.
Frequently asked questions
Can this equipment print every transfer material?
No. Film, ink, adhesive and curing requirements must be checked with real samples before selecting a production configuration.
Does this machine apply the transfer to garments?
These screen printers make the printed transfer layer. Application to the finished product requires a compatible heat press and validated settings.