Heat transfer labels for bags, caps and outdoor gear
Bags, caps, gloves and outdoor goods use different coatings and assembly paths. Select a transfer construction only after checking temperature tolerance, surface finish, curvature and end-use abrasion on representative parts.
Production route
Test the actual coating and assembly stage of each bag, cap or outdoor product; heat pressing can damage seams and hardware.
Equipment for printing the transfer layer; heat pressing and final garment qualification are separate steps.
What to validate before production
- Carrier dimensional stability after each dryer pass
- Layer-to-layer registration across the full web or sheet
- Ink and adhesive compatibility with the intended fabric
- Peel, wash, stretch and abrasion on production samples
Equipment selection
No. Film, ink, adhesive and curing requirements must be checked with real samples before selecting a production configuration.
Frequently asked questions
Can this equipment print every transfer material?
No. Film, ink, adhesive and curing requirements must be checked with real samples before selecting a production configuration.
Does this machine apply the transfer to garments?
These screen printers make the printed transfer layer. Application to the finished product requires a compatible heat press and validated settings.